open_Netcenter Forum |
Autor | Thema: Log Flash Netcenter mit MSS-Firmware | ||
---|---|---|---|
Mike Administrator ID # 1 |
Erstellt am 11. August 2006 19:33 (#1)
Zitat
PN E-Mail
Hi,
hier der Log eines (bisher) nicht erfolgreichen Flashversuchs der MSS-Firmware auf das Netcenter. Vielleicht sind so Rückschlüsse auf ein erfolgreiches Verwenden der open-MSS auf dem Netcenter möglich. Zumindest ist nach dem Flashen ein telnet-Zugang möglich (nach Aktivierung per serieller Konsole) und ganz unten ist der neue Maxtor-Anmeldungscreen des Netcenters zu sehen... Mir ist in diesem Log z.B. folgendes aufgefallen: Netcenter: "New Disk Handling: Creating new pool `Main' of size 239088944 blocks on newly discovered disk `SYSTEM'. /dev/ide/host2/bus0/target0/lun0: p1 p2 p3 p63handling MD devi<6>md: bind ce /dev/md/1" Log beim MSS: "New Disk Handling: Creating new pool `mss-hdd' of size 159803696 blocks on newly discovered disk `SYSTEM'. /dev/ide/host2/bus0/target1/lun0: p1 p2 p3 p63handling MD devi<6>md: bind ce /dev/md/1" -> also erfolgt das New-Disk-Handling nicht von Seiten der Firmware aus??? Ablauf des Flashens: genullte Festplatte eingesetzt Netzstecker gesteckt Hardreset ausgeführt bei der entsprechenden Aufforderung nasload gestartet hier das Log: Log Flash von mss_v1_2_2.bin / genullte HD -->> Netzstecker gesteckt CFE version 1.3.5 for BCM94780 (32bit,SP,LE) Build Date: Sun Jun 19 14:28:51 PDT 2005 (builder@nlab-sv1-builder) Copyright (C) 2000,2001,2002,2003 Broadcom Corporation. Initializing Arena. Initializing Devices. et0: Broadcom BCM47xx 10/100 Mbps Ethernet Controller 3.90.39.0 CPU type 0x29006: 264MHz Total memory: 0x2000000 bytes (32MB) Total memory used by CFE: 0x80300000 - 0x80441A90 (1317520) Initialized Data: 0x8033BEC0 - 0x8033E6E0 (10272) BSS Area: 0x8033E6E0 - 0x8033FA90 (5040) Local Heap: 0x8033FA90 - 0x8043FA90 (1048576) Stack Area: 0x8043FA90 - 0x80441A90 (8192) Text (code) segment: 0x80300000 - 0x8033BEC0 (245440) Boot area (physical): 0x00442000 - 0x00482000 Relocation Factor: I:00000000 - D:00000000 Device eth0: hwaddr 00-90-A9-01-A0-02, ipaddr 192.168.1.3, mask 255.255.255.0 gateway not set, nameserver not set Waiting to load image on IP 192.168.1.3, ^C to abort...Failed.: Timeout occured Loader:raw Filesys:raw Dev:flash0.os File: Options:(null) Loading: .. 2666496 bytes read Entry at 0x80001000 Closing network. Starting program at 0x80001000 -->> Hardreset ausgeführt CFE version 1.3.5 for BCM94780 (32bit,SP,LE) Build Date: Sun Jun 19 14:28:51 PDT 2005 (builder@nlab-sv1-builder) Copyright (C) 2000,2001,2002,2003 Broadcom Corporation. Initializing Arena. Initializing Devices. et0: Broadcom BCM47xx 10/100 Mbps Ethernet Controller 3.90.39.0 CPU type 0x29006: 200MHz Total memory: 0x2000000 bytes (32MB) Total memory used by CFE: 0x80300000 - 0x80441A90 (1317520) Initialized Data: 0x8033BEC0 - 0x8033E6E0 (10272) BSS Area: 0x8033E6E0 - 0x8033FA90 (5040) Local Heap: 0x8033FA90 - 0x8043FA90 (1048576) Stack Area: 0x8043FA90 - 0x80441A90 (8192) Text (code) segment: 0x80300000 - 0x8033BEC0 (245440) Boot area (physical): 0x00442000 - 0x00482000 Relocation Factor: I:00000000 - D:00000000 Device eth0: hwaddr 00-90-A9-01-A0-02, ipaddr 192.168.1.5, mask 255.255.255.0 gateway not set, nameserver not set Committing NVRAM...doneÿ CFE version 1.3.5 for BCM94780 (32bit,SP,LE) Build Date: Sun Jun 19 14:28:51 PDT 2005 (builder@nlab-sv1-builder) Copyright (C) 2000,2001,2002,2003 Broadcom Corporation. Initializing Arena. Initializing Devices. et0: Broadcom BCM47xx 10/100 Mbps Ethernet Controller 3.90.39.0 CPU type 0x29006: 264MHz Total memory: 0x2000000 bytes (32MB) Total memory used by CFE: 0x80300000 - 0x80441A90 (1317520) Initialized Data: 0x8033BEC0 - 0x8033E6E0 (10272) BSS Area: 0x8033E6E0 - 0x8033FA90 (5040) Local Heap: 0x8033FA90 - 0x8043FA90 (1048576) Stack Area: 0x8043FA90 - 0x80441A90 (8192) Text (code) segment: 0x80300000 - 0x8033BEC0 (245440) Boot area (physical): 0x00442000 - 0x00482000 Relocation Factor: I:00000000 - D:00000000 Device eth0: hwaddr 00-90-A9-01-A0-02, ipaddr 192.168.1.5, mask 255.255.255.0 gateway not set, nameserver not set Waiting to load image on IP 192.168.1.5, ^C to abort... Waiting for announcement from download server... Identifying self and waiting for download server authorization request... Waiting for download server authorization... Received download server authorization. Starting download. Done. 7495829 bytes read Programming...done. 1617920 bytes written disk: Device not found Loader:raw Filesys:raw Dev:flash0.os File: Options:(null) Loading: .. 2658304 bytes read Entry at 0x80001000 Closing network. Starting program at 0x80001000 CPU revision is: 00029006 Primary instruction cache 16kb, linesize 16 bytes (2 ways) Primary data cache 16kb, linesize 16 bytes (2 ways) Linux version 2.4.20 (root@localhost.localdomain) (gcc version 3.0 20010422 (prerelease) with bcm4710a0 modifications) #2 Wed May 18 18:24:32 PDT 2005 BCM47XX ChipID = 0x4704, RevisionID = 8, Options = 0x2 Setting GPIO 3 to output of 1. Setting GPIO 4 to output of 1. Setting GPIO 6 to output of 1. Determined physical RAM map: memory: 02000000 @ 00000000 (usable) On node 0 totalpages: 8192 zone(0): 8192 pages. zone(1): 0 pages. zone(2): 0 pages. Kernel command line: root=/dev/mtdblock2 noinitrd console=ttyS0,115200 CPU: BCM4704 rev 8 at 264 MHz Calibrating delay loop... 263.78 BogoMIPS Memory: 29532k/32768k available (2358k kernel code, 3236k reserved, 132k data, 84k init, 0k highmem) Dentry cache hash table entries: 4096 (order: 3, 32768 bytes) Inode cache hash table entries: 2048 (order: 2, 16384 bytes) Mount-cache hash table entries: 512 (order: 0, 4096 bytes) Buffer-cache hash table entries: 1024 (order: 0, 4096 bytes) Page-cache hash table entries: 8192 (order: 3, 32768 bytes) Checking for 'wait' instruction... unavailable. POSIX conformance testing by UNIFIX PCI: Fixing up bus 0 PCI: Fixing up bridge PCI: Fixing up bus 1 Linux NET4.0 for Linux 2.4 Based upon Swansea University Computer Society NET3.039 Initializing RT netlink socket Starting kswapd devfs: v1.12c (20020818) Richard Gooch (rgooch@atnf.csiro.au) devfs: boot_options: 0x1 Installing knfsd (copyright (C) 1996 okir@monad.swb.de). NTFS driver v1.1.22 [Flags: R/O] i2c-core.o: i2c core module i2c-dev.o: i2c /dev entries driver module i2c-core.o: driver i2c-dev dummy driver registered. i2c-algo-bit.o: i2c bit algorithm module i2c-proc.o version 2.6.1 (20010825) pty: 256 Unix98 ptys configured Serial driver version 5.05c (2001-07-08) with MANY_PORTS SHARE_IRQ SERIAL_PCI enabled ttyS00 at 0xb8000300 (irq = 3) is a 16550A ttyS01 at 0xb8000400 (irq = 0) is a 16550A Generic MIPS RTC Driver v1.0 Uniform Multi-Platform E-IDE driver Revision: 6.31 ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx AEC6265: IDE controller on PCI bus 01 dev 10 PCI: Enabling device 01:02.0 (0000 -> 0003) AEC6265: chipset revision 16 AEC6265: not 100% native mode: will probe irqs later ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx AEC6265: ROM disabled at 0x00000000 ide2: BM-DMA at 0x0180-0x0187, BIOS settings: hde:pio, hdf:pio ide3: BM-DMA at 0x0188-0x018f, BIOS settings: hdg:pio, hdh:pio IDE: While probing, found an IDE channel that is busy (hde). IDE: Probably, this means the drive hasn't spun up yet. IDE: We'll wait for it to spin up (but no more than 30 seconds). IDE: The IDE channel is not busy any more, so we can continue probing. hde: Maxtor 6Y120L0, ATA DISK drive ide2 at 0x100-0x107,0x10a on irq 2 blk: queue 802b9488, I/O limit 4095Mb (mask 0xffffffff) hde: 240121728 sectors (122942 MB) w/2048KiB Cache, CHS=238216/16/63, (U)DMA Partition check: /dev/ide/host2/bus0/target0/lun0: unknown partition table PPP generic driver version 2.4.2 SCSI subsystem driver Revision: 1.00 scsi0 : SCSI host adapter emulation for IDE ATAPI devices Amd/Fujitsu Extended Query Table v1.3 at 0x0040 number of CFI chips: 1 Flash device: 0x800000 at 0x1c000000 Physically mapped flash: cramfs filesystem found at block 1380 Creating 5 MTD partitions on "Physically mapped flash": 0x00000000-0x00040000 : "cfe" 0x00040000-0x007e0000 : "linux" 0x00159348-0x007e0000 : "rootfs" 0x007e0000-0x007f0000 : "nvramcopy" 0x007f0000-0x00800000 : "nvram" sflash: found no supported devices usb.c: registered new driver usbdevfs usb.c: registered new driver hub PCI: Enabling device 01:03.2 (0000 -> 0002) ehci_hcd 01:03.2: PCI device 1106:3104 ehci_hcd 01:03.2: irq 2, pci mem c000f000 usb.c: new USB bus registered, assigned bus number 1 ECHI PCI device 31041106 found. ECHI reg 0x49 = 80233220 ECHI reg 0x49 changed to = 80233200 ECHI reg 0x4b = 80233209 ECHI reg 0x4b changed to = 80233229 PCI: 01:03.2 PCI cache line size set incorrectly (0 bytes) by BIOS/FW, correcting to 32 ehci_hcd 01:03.2: USB 2.0 enabled, EHCI 1.00, driver 2003-Dec-29/2.4 hub.c: USB hub found hub.c: 4 ports detected host/usb-uhci.c: $Revision: 1.275 $ time 18:24:40 May 18 2005 host/usb-uhci.c: High bandwidth mode enabled PCI: Enabling device 01:03.0 (0000 -> 0001) ECHI PCI device 30381106 found. UCHI reg 0x41 = 10 UCHI reg 0x41 changed to = 0 host/usb-uhci.c: USB UHCI at I/O 0x200, IRQ 2 host/usb-uhci.c: Detected 2 ports usb.c: new USB bus registered, assigned bus number 2 hub.c: USB hub found hub.c: 2 ports detected PCI: Enabling device 01:03.1 (0000 -> 0001) ECHI PCI device 30381106 found. UCHI reg 0x41 = 10 UCHI reg 0x41 changed to = 0 host/usb-uhci.c: USB UHCI at I/O 0x220, IRQ 2 host/usb-uhci.c: Detected 2 ports hub.c: port 3 over-current change usb.c: new USB bus registered, assigned bus number 3 hub.c: port 4 over-current change hub.c: USB hub found hub.c: 2 ports detected host/usb-uhci.c: v1.275:USB Universal Host Controller Interface driver host/usb-ohci.c: USB OHCI at membase 0xb8003000, IRQ 6 host/usb-ohci.c: usb-00:03.0, PCI device 14e4:4715 usb.c: new USB bus registered, assigned bus number 4 hub.c: USB hub found hub.c: 2 ports detected usb.c: registered new driver usblp printer.c: v0.13: USB Printer Device Class driver Initializing USB Mass Storage driver... usb.c: registered new driver usb-storage USB Mass Storage support registered. md: linear personality registered as nr 1 md: raid0 personality registered as nr 2 md: raid1 personality registered as nr 3 md: md driver 0.90.0 MAX_MD_DEVS=256, MD_SB_DISKS=27 md: Skipping autodetection of RAID arrays. NET4: Linux TCP/IP 1.0 for NET4.0 IP Protocols: ICMP, UDP, TCP IP: routing cache hash table of 512 buckets, 4Kbytes TCP: Hash tables configured (established 2048 bind 4096) NET4: Unix domain sockets 1.0/SMP for Linux NET4.0. NET4: Ethernet Bridge 008 for NET4.0 VFS: Mounted root (cramfs filesystem) readonly. Mounted devfs on /dev Freeing unused kernel memory: 84k freed Algorithmics/MIPS FPU Emulator v1.5 pivot_rc starting... pivot_rc proceeding to boot from disk... pivot_rc boot loop error for location 0... pivot_rc boot loop error for location 1... pivot_rc did not boot -> hang wait for network loading... Using /lib/modules/2.4.20/kernel/drivers/net/et/et.o Symbol version prefix '' Warning: loading /lib/modules/2.4.20/kernel/drivers/net/et/et.o will taint the kernel: no license See http://www.tux.org/lkml/#export-tainted for informationeth0: Broadcom BCM47xx 10/100 Mbps Ethernet Controller 3.60.13.0 about tainted modules Module et loaded, with warnings eth0: No such process eth2: No such device eth1: No such device Waiting for new image on IP 192.168.1.5. Waiting for announcement from download server... Found download server at IP 192.168.1.2 Identifying self and waiting for download server authorization request... Waiting for download server authorization... Received download server authorization. Claiming `/dev/ide/host2/bus0/target0/lun0/disc' as `SYSTEM'. /dev/ide/host2/bus0/target0/lun0: p1 p2Download successful. pivot_rc complete -> calling /sbin/init... Using /lib/modules/2.4.20/kernel/arch/mips/brcm-boards/bcm947xx/bcmserbus.o Using /lib/modules/2.4.20/kernel/drivers/i2c/bcm2wire.o i2c-dev.o: Registered 'Broadcom 2-wire serial bus' as minor 0 i2c-core.o: adapter Broadcom 2-wire serial bus registered as adapter 0. Using /lib/modules/2.4.20/kernel/arch/mips/brcm-boards/bcm947xx/bcmrtcst4181.o i2c-core.o: driver STM41T81 registered. i2c-core.o: client [STM41T81] registered to adapter [Broadcom 2-wire serial bus](pos. 0). Using /lib/modules/2.4.20/kernel/arch/mips/brcm-boards/bcm947xx/bcmlm63.o bcmlm63.o version 2.6.5 (20020915) i2c-core.o: driver LM63 sensor driver registered. Using /lib/modules/2.4.20/kernel/drivers/net/et/et.o insmod: A module named et already exists Using /lib/modules/2.4.20/kernel/drivers/scsi/frodo/frodo.o insmod: init_module: frodo: Device or resource busy Using /lib/modules/2.4.20/kernel/arch/mips/brcm-boards/bcm947xx/bcmgpio.o Using /lib/modules/2.4.20/security/sec.o BCM582x driver v1.84: BCM582x: Selftest flag not set. Not doing Selftest BCM582x: 4708: part number 00000000 Using /lib/modules/2.4.20/kernel/drivers/se/bcm_se.o Loading Broadcom streaming encryption device module... SE driver version 1.0, maximum 256 SE devices Checking to see that USB initialization is done... Turning on swapping... /dev/ide/host2/bus0/target0/lun0: p1 p2 p63handling MD device /dev/md/0 analyzing super-block disk 1: /dev/null, failed disk 2: /dev/nul<6>md: bind l, failed disk md: nonpersistent superblock ... 3: /dev/null, famd: ide/host2/bus0/target0/lun0/part63's event counter: 00000000 failed disk 4: /dmd: md0: raid array is not clean -- starting background reconstruction ev/null, failed md: RAID level 1 does not need chunksize! Continuing anyway. disk 5: /dev/numd0: max total readahead window set to 124k ll, failed diskmd0: 1 data-disks, max readahead per data-disk: 124k 6: /dev/null, fraid1: device ide/host2/bus0/target0/lun0/part63 operational as mirror 0 failed disk 7: /raid1: md0, not all disks are operational -- trying to recover array dev/null, failedraid1: raid set md0 active with 1 out of 8 mirrors md: recovery thread got woken up ... md0: no spare disk to reconstruct array! -- continuing in degraded mode md: recovery thread finished ... Setting up swapspace version 1, size = 511995904 bytes Adding Swap: 499992k swap-space (priority -1) New Disk Handling: Creating new pool `Main' of size 239088944 blocks on newly discovered disk `SYSTEM'. /dev/ide/host2/bus0/target0/lun0: p1 p2 p3 p63handling MD devi<6>md: bind ce /dev/md/1 anmd: nonpersistent superblock ... alyzing super-blmd: ide/host2/bus0/target0/lun0/part3's event counter: 00000000 ock md1: max total readahead window set to 124k md1: 1 data-disks, max readahead per data-disk: 124k handling MD devimd: bind ce /dev/md/2 anmd: md/1's event counter: 00000000 alyzing super-blmd: md2: raid array is not clean -- starting background reconstruction ock disk 0: /demd: RAID level 1 does not need chunksize! Continuing anyway. v/md/1, 11954447md2: max total readahead window set to 124k 2kB, raid superbmd2: 1 data-disks, max readahead per data-disk: 124k lock at 11954438raid1: device md/1 operational as mirror 0 4kB raid1: raid set md2 active with 1 out of 1 mirrors md: updating md2 RAID superblock on device md: md/1 [events: 00000001]<6>(write) md/1's sb offset: 119544384 mkreiserfs 3.6.11 (2003 www.namesys.com) A pair of credits: Continuing core development of ReiserFS is mostly paid for by Hans Reiser from money made selling licenses in addition to the GPL to companies who don't want it known that they use ReiserFS as a foundation for their proprietary product. And my lawyer asked 'People pay you money for this?'. Yup. Life is good. If you buy ReiserFS, you can focus on your value add rather than reinventing an entire FS. Alexander Lyamin keeps our hardware running, and was very generous to our project in many little ways. Mounting /dev/se/2 on /shares/Main. reiserfs: checking transaction log (device fe:02) ... Using r5 hash to sort names reiserfs: Created .reiserfs_priv on se(254,2) - reserved for xattr storage. ReiserFS version 3.6.25 New Disk Handling: Creating new share `Shared Files' in new pool `Main' on newly discovered disk `SYSTEM'. New Disk Handling: Finished creating new share `Shared Files' in new pool `Main' on newly discovered disk `SYSTEM'. killall: smbd: no process killed Hit enter to short-circuit regular system start-up...Restoring defaults...done No SATA controller found. info, udhcp client (v0.9.8) started eth0: No such process eth2: No such device eth1: No such device killall: udhcpd: no process killed debug, Sending discover... killall: udhcpd: no process killed info, udhcp server (v0.9.8) started error, SIOCGIFADDR failed, is the interface up and configured?: No such device killall: dnsmasq: no process killed iptables who? (do you need to insmod?) iptables who? (do you need to insmod?) iptables who? (do you need to insmod?) iptables who? (do you need to insmod?) iptables who? (do you need to insmod?) iptables who? (do you need to insmod?) iptables who? (do you need to insmod?) iptables who? (do you need to insmod?) iptables who? (do you need to insmod?) iptables who? (do you need to insmod?) iptables who? (do you need to insmod?) iptables who? (do you need to insmod?) iptables who? (do you need to insmod?) iptables who? (do you need to insmod?) debug, Sending select for 192.168.1.3... recvfrom: Connection refused info, Lease of 192.168.1.3 obtained, lease time -1 httpd: WARNING: Unable to open library libwdhooks.so: libwdhooks.so: cannot open shared object file: No such file or directory. httpd pid is 116. info, udhcp server (v0.9.8) started error, SIOCGIFADDR failed, is the interface up and configured?: No such device sensord pid is 0. eth0: No such process eth2: No such device eth1: No such device No interface specified. Quitting... killall: udhcpd: no process killed killall: udhcpd: no process killed info, udhcp server (v0.9.8) started error, SIOCGIFADDR failed, is the interface up and configured?: No such device killall: dnsmasq: no process killed iptables who? (do you need to insmod?) iptables who? (do you need to insmod?) iptables who? (do you need to insmod?) iptables who? (do you need to insmod?) iptables who? (do you need to insmod?) iptables who? (do you need to insmod?) iptables who? (do you need to insmod?) iptables who? (do you need to insmod?) iptables who? (do you need to insmod?) iptables who? (do you need to insmod?) iptables who? (do you need to insmod?) iptables who? (do you need to insmod?) iptables who? (do you need to insmod?) iptables who? (do you need to insmod?) mountd started successfully on try number 1. Network configuration has changed. Restarting services. Failed trying to open `/shares/Main/__share_Shared Files_vars.txt': No such file or directory eth0: No such process eth2: No such device eth1: No such device killall: udhcpd: no process killed killall: udhcpd: no process killed info, udhcp server (v0.9.8) started error, SIOCGIFADDR failed, is the interface up and configured?: No such device killall: dnsmasq: no process killed iptables who? (do you need to insmod?) iptables who? (do you need to insmod?) iptables who? (do you need to insmod?) iptables who? (do you need to insmod?) iptables who? (do you need to insmod?) iptables who? (do you need to insmod?) iptables who? (do you need to insmod?) iptables who? (do you need to insmod?) iptables who? (do you need to insmod?) iptables who? (do you need to insmod?) iptables who? (do you need to insmod?) iptables who? (do you need to insmod?) iptables who? (do you need to insmod?) iptables who? (do you need to insmod?) Failed trying to open `/shares/Main/__share_Shared Files_vars.txt': No such file or directory Failed trying to open `/shares/Main/__share_Shared Files_vars.txt': No such file or directory wdstartup: not found Hit enter to continue...rc restarting syslogd. killall: klogd: no process killed killall: syslogd: no process killed rc restarting CIFS. killall: smbd: no process killed killall: nmbd: no process killed killall: smbd: no process killed killall: nmbd: no process killed Failed trying to open `/shares/Main/__share_Shared Files_vars.txt': No such file or directory Failed trying to open `/shares/Main/__share_Shared Files_vars.txt': No such file or directory rc restarting NFS. killall: [rpciod]: no process killed killall: [lockd]: no process killed nfsd: last server has exited nfsd: unexporting all filesystems killall: [nfsd]: no process killed Cannot register service: RPC: Unable to receive; errno = Connection refused Attempt to start mountd failed. It may be because the portmapper wasn't done initializing yet. We'll give it another try... mountd started successfully on try number 2. Failed trying to open `/shares/Main/__share_Shared Files_vars.txt': No such file or directory rc restarting NAS. killall: nas: no process killed rc restarting UPNP. No interface specified. Quitting... killall: upnp: no process killed rc restarting DNS. killall: dnsmasq: no process killed rc restarting HTTPD. httpd: WARNING: Unable to open library libwdhooks.so: libwdhooks.so: cannot open shared object file: No such file or directory. httpd pid is 219. eth0: Link up. BusyBox v1.00-pre2 (2005.05.19-01:13+0000) Built-in shell (msh) Enter 'help' for a list of built-in commands. # # ----- Das der Flash zum Teil erfolgreich war, zeigt dieses neue Anmeldefenster vom Netcenter im Webbrowser: Telnet: Im Verzeichnis /bin gibts jetzt u.a. auch eine Datei "utelnetd" Also habe ich mal in der seriellen Konsole den Dienst zu starten versucht: # utelnetd telnetd: starting port: 23; interface: any; login program: /bin/sh ... und er startet und nun komme ich vom Rechner via telnet auf das Netcenter. Na da muss sich doch was machen lassen... Gruß Mike |
||
Beiträge: 179 | Mitglied seit: Juli 2006 | IP-Adresse: gespeichert | |||
mafe Ist öfters hier ID # 7 |
Erstellt am 12. August 2006 11:00 (#2)
Zitat
PN E-Mail
WOW,
das hört sich wirklich sehr vielversprechend an!!! Im ersten Moment dachte ich, dass die Netzwerkkarte irgendwie falsch geladen wird. Nun sie funktioniert ja, nachdem Telnet geht ;-) Wg. der Maxtor Konfigurationsseite (via web) könnte ich mir gut vorstellen, das im Speicher oder auf der Festplatte zusätzlich benötigte Dateien abgelegt sind und diese natürlich auf dem NetCenter fehlen. -> Schonmal die Platte/Partition von der Maxtor in die WD eingebaut? Anderen Lösungsweg: Umgekehrt, da anscheinend eine MSS vorliegt, diese mit der Firmware von WD geflasht? des weiteren scheint es, dass noch weitere Applikationen via ein Skript (oder was auch immer) durch wdstartup gestartet werden. -> weitere Partitionen, die vom Flashen unberührt bleiben. Sind diese Partitionen gemountet bzw. kommt man an diese Dateien heran? Erweitern durch die Dateien auf der Maxtor möglich?!?!? (evtl. existiert ja auch eine Maxtorstartup ;-) Weiter so!! |
||
Beiträge: 21 | Mitglied seit: Juli 2006 | IP-Adresse: gespeichert | |||
Mike Administrator ID # 1 |
Erstellt am 12. August 2006 11:24 (#3)
Zitat
PN E-Mail
...das Log zur MSS habe ich von der open-mss-Webseite Das Problem ist mit Sicherheit der CFE-Bereich - der wird ja nicht mitgeflasht. Wenn der gegen den vom MSS austauschbar ist, dann funktionierts. Ich muss aber erst mal den originalen CFE-Bereich sichern, bevor ich die cfe.bin vom MSS aufs Netcenter flashe. Darum kümmere ich mich an diesem Wochenende, Zugriff darauf habe ich ja schon. Nun brauche ich nur noch einen Tip, wie ich den CFE-Bereich per serieller Konsole oder Telnet sichern kann. Und zwar so, dass er wieder zurückgeflasht werden könnte, also als cfe.bin. WD hatte diese cfe.bin im Firmwaredownload v.1.0.0.015, aber an den kommt wohl keiner mehr ran und WD wird mir den nicht einfach so schicken. Mit JTAG geht das zwar, aber dazu müßte ich erst noch ein spezielles, paralleles Interface bauen (die Anschluss-Lötpunkte sind auf der Platine vorhanden). Hat/kennt denn vielleicht jemand einen JTAG-Treiber für ein serielles, 4-poliges(!) Kabel? Sonst ist das Netcenter vielleicht nachher nur noch ein Briefbeschwerer... Gruß Mike |
||
Beiträge: 179 | Mitglied seit: Juli 2006 | IP-Adresse: gespeichert | |||
christian80nrw Lernt noch alles kennen ID # 8 |
Erstellt am 12. August 2006 22:37 (#4)
Zitat
PN E-Mail HP
Ja, da ist irgendwas mit den Pfaden nicht richtig. Vielleicht kannst Du es per Telnet korrigieren und dann daraus ein neues Image erstellen. Bist ja momentan der einzige der Zugriff drauf hat.
Oder versuch mal ein Image zu erstellen mit aktiviertem Autostart des Telnets, damit ich es mal bei mir flashen kann und auch Zugriff hab. Müsste so ähnlich wie mit dem NFS-Dienst gehen: To start NFS automatically every time the MSS is powered on, create a file in /opt/etc/init.d/ called something like S60nfsd and containing the above commands and the following on the first line: # #!/bin/sh Make sure that the file is executable with: # chmod +x S60nfsd NACHTRAG: Ich weiss leider nicht, ob ein Backup irgendwie per TFTP möglich ist, oder ob man wirklich einen JTAG-Adapter dafür braucht. Ich hoffs jedenfalls nicht. |
||
Beiträge: 14 | Mitglied seit: August 2006 | IP-Adresse: gespeichert | |||
Mike Administrator ID # 1 |
Erstellt am 13. August 2006 11:52 (#5)
Zitat
PN E-Mail
Da stimmen nicht nur die Pfade nicht. Denn auch ein /opt-Verzeichnis gibt es nicht und die Dienste starten nicht automatisch. Momentan muss ich per serieller Konsole Telnet aktivieren und kann dann darüber weitere Dienste starten. Aber es eröffnet weitere Möglichkeiten, zum Beispiel das Installieren von Diensten per wget (z.B. ftp). Heute werde ich das JTAG-Kabel anlöten und erst mal alles Wichtige, wie Bootloader etc. sichern, bevor ich mich an der Configuration des CFE/NVRam vergreife. Update: Das Kabel ist fertig, nun fehlt noch ein Programm, dass den Broadcom BCM91780 unterstützt. Das wgt54 V4.5 kennt ihn noch nicht... Witzigerweise läßt sich das Netcenter mit der open-mss-FW von Windows aus normal benutzen, obwohl die LED hektisch rot-blau blinkt. Ich kann im shared-files-Verzeichnis problemlos speichern, es eben nur nicht per Webbrowser konfigurieren. Gruß Mike |
||
Beiträge: 179 | Mitglied seit: Juli 2006 | IP-Adresse: gespeichert | |||
christian80nrw Lernt noch alles kennen ID # 8 |
Erstellt am 15. August 2006 22:34 (#6)
Zitat
PN E-Mail HP
Vertust Du Dich hier nicht?
Es geht doch hier um den Prozessor oder nicht? Und das ist der BCM47XX, der vom JTAG-Tool durchaus unterstützt wird. Versuch mal diese Tools: http://downloads.openwrt.org/utils/ http://www.ranvik.net/prosjekter-privat/jtag_for_wrt54g_og_wrt54gs/new-winxp_ejtag_debrick_v%5b1%5d.99beta/ Und guck mal hier in diesem Thread hat jemand eine Zeichnung der Pins für den JTAG-Adapter gemacht. Vielleicht ist der Flash-Chip gleich. http://forum.openwrt.org/viewtopic.php?id=2999&p=1 |
||
Beiträge: 14 | Mitglied seit: August 2006 | IP-Adresse: gespeichert | |||
Mike Administrator ID # 1 |
Erstellt am 16. August 2006 22:12 (#7)
Zitat
PN E-Mail
Danke für den Link Christian.
Das werde ich mir morgen mal in Ruhe ansehen und mit meinem Schaltplan vergleichen und auch mal den Aufkleber vom Netcenter-Flashspeicher entfernen. [Edit:] klar ich meinte natürlich den BCM4780, wie bin ich bloß auf 91780 gekommen...[Edit Ende] Gruß Mike |
||
Beiträge: 179 | Mitglied seit: Juli 2006 | IP-Adresse: gespeichert | |||
christian80nrw Lernt noch alles kennen ID # 8 |
Erstellt am 19. August 2006 18:40 (#8)
Zitat
PN E-Mail HP
Ich hoffe das es noch irgendwie klappt mit der Firmware.
Lies Dir mal diesen Thread in Ruhe durch. Vielleicht kann man das auch mit der WD-Firmware so machen. http://www.openmss.org/forum/viewtopic.php?t=120&postdays=0&postorder=asc&highlight=jtag&start=0 |
||
Beiträge: 14 | Mitglied seit: August 2006 | IP-Adresse: gespeichert | |||
Mike Administrator ID # 1 |
Erstellt am 21. August 2006 14:47 (#9)
Zitat
PN E-Mail
Hi Christian, ja, das kannte ich schon und ich hatte auch die einzelnen Schritte mit der SimpleShare-Firmware erfolgreich nachvollziehen können. (Da fällt mir ein, die wollte ich doch auch mal auf dem Netcenter testen - mache ich noch) Ich habe das dann probehalber mal mit der Netcenter-Firmware versucht: # dd if=R1_1_0.003.wdf of=root.cramfs bs=1 skip=1151648 .. und erhalte auch eine root.cramfs, aber nach # mount -o loop,ro ./root.cramfs /mnt ... kommt leider nur die Fehlermeldung: must specify filesystem (oder so ähnlich) Wäre aber auch zu einfach gewesen. Was mir eben noch fehlt, ist eine Analyse der Netcenter-Firmware, so wie es von John bei der MSS-FW gemacht wurde. Ich muss mir das aber erst noch selbst erarbeiten, denn ich habe inzwischen keine Lust mehr, im openmss-Forum um Hilfe zu betteln und dann nicht mal irgendeine Antwort zu bekommen. Du hattest doch im Chat schon Kontakt mit John, vielleicht kannst Du ihn ja mal fragen, wie bei der Netcenter-FW der Kernel (piggy) und Filesystem (root-cramfs) extrahiert werden können. Dann kämen wir weiter. Gruß Mike |
||
Beiträge: 179 | Mitglied seit: Juli 2006 | IP-Adresse: gespeichert | |||
christian80nrw Lernt noch alles kennen ID # 8 |
Erstellt am 22. August 2006 00:56 (#10)
Zitat
PN E-Mail HP
Kannst Du vielleicht nochmal ein Listing mit den eingegeben Befehlen und der Fehlermeldung posten? Dann hätte ich was um es Jon besser zu erklären. Danke Dir.
|
||
Beiträge: 14 | Mitglied seit: August 2006 | IP-Adresse: gespeichert | |||
Mike Administrator ID # 1 |
Erstellt am 22. August 2006 19:44 (#11)
Zitat
PN E-Mail
Hast eine PM... ... Sorry an Alle, ist keine Privatunterhaltung, will nur noch nichts eventuell halbfertiges oder fehlerhaftes veröffentlichen ... Gruß Mike |
||
Beiträge: 179 | Mitglied seit: Juli 2006 | IP-Adresse: gespeichert | |||
christian80nrw Lernt noch alles kennen ID # 8 |
Erstellt am 23. August 2006 22:53 (#12)
Zitat
PN E-Mail HP
Hi Mike!
Mail zurück ;-) Gruss! Christian |
||
Beiträge: 14 | Mitglied seit: August 2006 | IP-Adresse: gespeichert | |||
Mike Administrator ID # 1 |
Erstellt am 24. August 2006 20:08 (#13)
Zitat
PN E-Mail
... und hast Du´s eigentlich getestet?
Es läuft bei mir immer noch perfekt auf beiden Netcentern. Die Warnmeldung habe ich selbst wegbekommen, das cramfs-Image war 3 Byte zu groß und das waren obendrein nur Leerzeilen, bei einer Gesamtgröße von knapp 7 MB echt bedeutend . Gruß Mike |
||
Beiträge: 179 | Mitglied seit: Juli 2006 | IP-Adresse: gespeichert | |||
christian80nrw Lernt noch alles kennen ID # 8 |
Erstellt am 24. August 2006 21:30 (#14)
Zitat
PN E-Mail HP
Wollte ich gerade... Hatte vorher keine Zeit dazu. Ist das File nicht mehr auf dem Server? Guck mal, hatte Dir ne PM gesendet. Gruss!
|
||
Beiträge: 14 | Mitglied seit: August 2006 | IP-Adresse: gespeichert | |||
Mike Administrator ID # 1 |
Erstellt am 25. August 2006 21:37 (#15)
Zitat
PN E-Mail
Hi Christian,
Sorry, hatte inzwischen eine neue Version gebaut. Kannst die FW jetzt auf den Webseiten laden (Firmware -> _openFW). Am Wochenende gibts mehr Erklärung dazu, hab dann mehr Zeit. Die PM habe ich gelesen . Über die Fremd-FW denke ich , dass macht wenig Sinn, aber schauen wir mal. Gruß Mike |
||
Beiträge: 179 | Mitglied seit: Juli 2006 | IP-Adresse: gespeichert | |||
christian80nrw Lernt noch alles kennen ID # 8 |
Erstellt am 25. August 2006 22:07 (#16)
Zitat
PN E-Mail HP
PM
Gruss! |
||
Beiträge: 14 | Mitglied seit: August 2006 | IP-Adresse: gespeichert | |||
Mike Administrator ID # 1 |
Erstellt am 26. August 2006 10:16 (#17)
Zitat
PN E-Mail
... ab jetzt machen wir öffentlich weiter. Sonst denkt man im Forum noch, wir haben was miteinander Gruß Mike |
||
Beiträge: 179 | Mitglied seit: Juli 2006 | IP-Adresse: gespeichert | |||
christian80nrw Lernt noch alles kennen ID # 8 |
Erstellt am 26. August 2006 13:14 (#18)
Zitat
PN E-Mail HP
Eine PM schick ich Dir aber noch...
Ich gucke mir die Tools mal an. Habe zwar im Moment keinen Linux-Rechner hier, werde es aber mit meinem VServer bei meinem Provider virtuell testen. Da müsste eigentlich auch alles mit gehen. So, jetzt schreib ich die PM |
||
Beiträge: 14 | Mitglied seit: August 2006 | IP-Adresse: gespeichert | |||
Dibo Ist öfters hier ID # 22 |
Erstellt am 11. Dezember 2006 19:25 (#19)
Zitat
PN
Any News? Ich weiß, dass Mike im Moment viel Arbeit hat, aber vielleicht gibt es ja doch irgendwas neues in dieser Richtung!
|
||
Beiträge: 21 | Mitglied seit: August 2006 | IP-Adresse: gespeichert |
| open_Netcenter Web - Infos, Handhabung, Anleitungen | Boardregeln
Tritanium Bulletin Board 1.6
© 2010–2014 Tritanium Scripts